ligitek electronics co.,ltd. property of ligitek only super bright round type led lamps doc. no : qw0905-LUY13533H rev. : a date : 23 - may - 2005 LUY13533H data sheet
directivity radiation note : 1.all dimension are in millimeter tolerance is ? 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. part no. LUY13533H page 1/4 package dimensions ligitek electronics co.,ltd. property of ligitek only 5.0 1.5max 25.0min 1.0min 2.54typ 0.5 typ 8.6 75% 25% 75% 100% 50% 25% 0 50% -60 x -30 x 0 x 30 x 100% 60 x
ligitek electronics co.,ltd. property of ligitek only typ. note : 1.the forward voltage data did not including ? 0.1v testing tolerance. 2. the luminous intensity data did not including ? 15% testing tolerance. algainp/gap LUY13533H water clear emitted yellow lens 590 20 min. 1.7 2.6 max. 20 7700 4000 min. 2000 esd v typical electrical & optical characteristics (ta=25 j ) dominant wave length f dnm material part no color operating temperature soldering temperature storage temperature tsol tstg t opr spectral halfwidth ??f nm forward voltage @20ma(v) viewing angle 2 c 1/2 (deg) luminous intensity @20ma(mcd) max 260 j for 5 sec max (2mm from body) -40 ~ +85 -40 ~ +100 j j absolute maximum ratings at ta=25 j electrostatic discharge power dissipation reverse current @5v peak forward current duty 1/10@10khz forward current ir pd i fp i f part no. LUY13533H parameter symbol uy(h) 10 130 100 50 g a mw ma ma ratings unit page 2/4
fig.3 forward voltage vs. temperature fig.5 relative intensity vs. wavelength ambient temperature( j ) relative intensity@20ma wavelength (nm) forward voltage@20ma normalize @25 j fig.4 relative intensity vs. temperature ambient temperature( j ) relative intensity@20ma normalize @25 j forward voltage(v) fig.1 forward current vs. forward voltage forward current(ma) forward current(ma) fig.2 relative intensity vs. forward current relative intensity normalize @20ma ligitek electronics co.,ltd. property of ligitek only 1.0 0.1 1.0 10 100 1000 1.0 10 100 1000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40 -20 0 20 40 60 1.0 1.1 1.2 500 550 600 0.0 0.5 1.0 2.0 3.0 4.0 5.0 80 100 0.8 0.9 -20 -40 40 20 080100 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 650 typical electro-optical characteristics curve uy(h) chip part no. LUY13533H page 3/4
ligitek electronics co.,ltd. property of ligitek only the purpose of this test is the resistance of the device under tropical for hous. solderability test solder resistance test thermal shock test high temperature high humidity test this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. 1.t.sol=230 j? 5 j 2.dwell time=5 ? 1sec this test intended to see soldering well performed or not. 1.ta=105 j? 5 j &-40 j? 5 j (10min) (10min) 2.total 10 cycles 1.t.sol=260 j? 5 j 2.dwell time= 10 ? 1sec. 1.ta=65 j? 5 j 2.rh=90 %~95% 3.t=240hrs ? 2hrs the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. part no. LUY13533H reliability test: high temperature storage test low temperature storage test operating life test test item the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. 1.ta=105 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) 1.ta=-40 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, + 72hrs) the purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. this test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. test condition description mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 mil-std-202:103b jis c 7021: b-11 mil-std-883:1008 jis c 7021: b-10 jis c 7021: b-12 mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 reference standard page 4/4
|
